Skip to main content
BitEdit Honda Keihin 1.5 NA MK22915
BitEdit Honda Keihin 1.5 NA
BitEdit Honda Keihin 1.5 NA

BitEdit Honda Keihin 1.5 NA

Write Review
$210.52 (€200.00)
Add to Wishlist
Product Code: MK22915
Categories Software Activation
Manufacturer BitSoftware
In StockIn Stock Digital ProductDigital Product
Product Specifications
Manufacturer BitSoftware

BitEdit Honda Keihin 1.5 NA


Product Description:

BitEdit Honda Keihin 1.5 NA allows to edit calibrations of the Honda/Acura Petrol 1.5 normal aspirated vehicles with Keihin TC1782 ECUs

Software Activation From BitSoftware with Product Number: MK22915

Specs:

Manufacturer: BitSoftware

Module Honda Keihin 1.5 NA

Software module allows to edit calibrations of the Honda/Acura Petrol 1.5 normal aspirated vehicles with Keihin TC1782 ECUs.

Supported filesize: 2.5Mb.

Available maps:

Air Calculation: Air Charge Efficiency High VTEC, Air Charge Efficiency Low VTEC, Airmass flow through throttle body in additional mode, Exhaust back pressure after catalyst, Airmass flow through throttle body direct
Camshaft control: Target camshaft angle High VTEC, Target camshaft angle Low VTEC, Camshaft Angle at WOT High VTEC, Camshaft Angle at WOT Low VTEC
EGT: EGT Prediction MAP by Air Intake A/B
Fuel: MAP Fuel High VTEC in additional mode, MAP Fuel Low VTEC in additional mode
Idle: Desired idle speed, Desired idle speed after start A, Desired idle speed after start B
Injector control: Injector scaling in additional mode
Knock Limit: Spark advance limitation for knocking High VTEC, Spark advance limitation for knocking Low VTEC
Knock sensitivity: Knock Sensitivity
Limiters: Engine speed limitation
Load limitation: Load limitation High VTEC, Load limitation Low VTEC
Overrun Cutoff: Overrun Injector Restart RPM Cut, Overrun Injector Restart RPM Recover
Sensors scaling: Lambda sensor conversion, Mass air flow sensor scaling
Spark advance: Spark advance EGR dependent High VTEC, Spark advance EGR dependent Low VTEC, Spark advance retardation to reduce torque High VTEC, Spark advance retardation to reduce torque Low VTEC, Dwell time, Ignition Dwell Angle
Spark advance corrections: Spark advance correction by intake temperature
Spark Compensation: Water Temperature Ignition Advance, Water Temperature Ignition Retard
Target Lambda: Target Lambda at full load, Target lambda in closed loop, Target lambda limit for closed loop
Throttle valve control: Driving Force in additional mode, Throttle valve position linearization High VTEC, Throttle valve position linearization Low VTEC, Enable throttle valve opening
Torque: Torque Limit Torque Limitation (Test, if found)
VTEC: Engine speed to enable VTEC (Test, if found)

Vehicle speed limitation - NO support!
DTC mask - NO support!

 

Supported SW list for Module Honda Keihin 1.5 NA

37805-62A-Q510_37805-62A-Q510 37805-62A-T510_37805-62A-T520 37805-62B-N010_37805-62B-N010
37805-62B-N510_37805-62B-N510 37805-62B-N710_37805-62B-N710 37805-62C-M510_37805-62C-M520
37805-62C-M710_37805-62C-M710 37805-62T-M510_37805-62T-M510 37805-6FJ-K510_37805-6FJ-K510
37805-6FJ-K610_37805-6FJ-K610 37805-6HA-J510_37805-6HA-J510 37805-6HC-N510_37805-6HC-N510
37805-6HP-Z510_37805-6HP-Z510 37805-6KR-K510_37805-6KR-K510 37805-6KR-K610_37805-6KR-K610
37805-6X1-U510_37805-6X1-U510
To top