Xtool AutoProPad Basic Transponder Programmer Device

The Xtool Autopropad Programming Machine From Xtool Is An Obd2 Vehicle Key/remote Programmer And An Eeprom Reader/programmer .

It's Ideal For Advanced Automotive Technicians And Locksmiths Providing Security Services For His Or Her Customers For Many Vehicle Makes Worldwide.
This Car Remote Key Programming Tool Is That The Perfect Complement To The Smart Pro/mvp Pro/tcode Pro For Locksmiths That Require Additional Coverage For Models Advanced Diagnostics Doesn't Support.
By The Center Of 2018, We Expect The Xtool Autopropad Car Remote Auto Pro Pad Key Programmer To Become An Entire Replacement For Other Machines Rather Than Just A Compliment.

Xtool Autopropad Main Features:

• Transponder & Remote Programming: Including Acura, Audi, Fiat, Ford, Gm, Honda, Hyundai, Infiniti, Isuzu, Jaguar, Kia, Lamborghini, Land Rover, Lexus, Mazda, Mercedes, Mitsubishi, Nissan, Porsche, Saab, Scion, Subaru, Toyota, And Volkswagen.
  Basic & Advanced Eeprom & Mcu Reflashing—replaces The Necessity For The Other Reflashing Device.
  Programs Honda/acura And Toyota/lexus: Reflashes A Good Selection Of Vehicles, Including 01-03 Prius, 03+ Sequoia, And 1997 Ls400.
• Ready-to-start Reflashing: Instead Of Virginizing The Immobilizer, You'll Reflash Most First-generation Toyotas And Lexus With A Ready-to-start File.
• After Reflashing, No Registration Process Is Required . The Car Will Start Immediately With A Pre-cloned Key. (This Process Is Required For Several "Early 1998" Toyota/lexus Vehicles Where A Standard Reflash Won't Work)
• Clone From The Immobilizer: Pulls A Key-value Needed To Write Down To A Cloning Key With A Cloner Which Will Start The Car.
• No Reflashing Is Required , Your Customer's Electronics Are Left Unaltered. (Customer's Original Key Will Still Be Operational)
• Save/backup Your Customer's Original Bin File Before Overwriting. Access All Saved Files Anytime Within The Future When Needed.
• Pin Reading Functionality For Chrysler, Isuzu, Nissan, And Vw Is Made In. Save Your Bin File From The Chip And Therefore The Xtool Autopropad Car Remote Auto Pro Pad Key Programmer Analyzes The File And Displays Out The Right Value.
• Unlimited Usage: No Tokens To Stress About. It'll Work Forever.
• Automotive Diagnostic Functions: Reading & Clearing Fault Codes. Also Includes A Plethora Of Other Diagnostic Capabilities (Fully Functioning Obd2 Diagnostic Tool For Auto Shops).
• Large Touchscreen Interface: Using The Massive 8" Capacitive Touch Screen, Paging Through The Choices Is Fast And Straightforward .
•  Technical Manuals, Circuit Diagrams, Common Trouble Codes, Etc.
• Are Available For Viewing On The Xtool Autopropad Car Remote Auto Pro Pad Key Programmer, Making External Support Less Necessary.
• The Power To Require Screenshots And Videos Of Your Screen Is Made Into The Tablet.

Xtool Autopropad Current & New Stand-out Features:

• Bmw Cas Key Programming
• Chrysler / Jeep / Fiat New System Pin Reading & Programming
• Chrysler Can Pin Reading & Programming
• Chrysler Type1 & Type2 Pin Read Via Eeprom
• Ford 128-bit Add-a-key & All-keys-lost Programming
• Ford Fusion 2013+ System Rolling Code Bypass (No Nastf Needed)
• Ford 10-minute Bypass On All-keys-lost For All Ford Systems: Skip Right Through The Traditional 10-minute Wait.
• Ford Parameter Reset
• Ford/lincoln/mercury Keyless Entry Keypad Code Read
• Gm Pin Code Reading
• Gm Remote Programming
• Honda 2017 Proximity System Programming
• Honda Transponder Programming: Super-quick!
• Hyundai & Kia Old Pin Codes: Converts Vin To Pin For 2007 And Older
• Hyundai & Kia New Pin Code Read: No More Buying Pins From The Dealer (Smart Keys)
• Nissan Bcm To Pin Conversion: Supports The 5-digit And 20-digit Bcms
• Subaru G-key (80-bit) Add-a-key & All-keys-lost Programming
• Toyota H-chip Programming W/ No 16-minute Wait (Internet Connection Required Until The Top Of February)
• Toyota G-chip Programming W/ No 16-minute Wait
• Toyota/lexus Proximity System 6 & 7 Programming All-keys-lost & Add-a-key (Ie. 2017 Toyota Ch-r & Prius Prime)
• Vw/audi 2013-2016 Programming For Add-a-key
• Vw Touareg 2005
• Alfa Romeo Programming
• Audi/vw 2013-2016 Programming For All-keys-lost
• Chrysler Type2 Pin Read Via Obd2
• Chrysler Pacifica 2016+
• Hyundai & Kia New Pin Code Read: (Slot Keys)
• Maserati Programming
• Subaru 2017 Msop Eeprom In-circuit Programming W/ Adapter
• Transponder Motorcycle Programming

Autopropad Main Unit Specifications:

• Operating System: Android
• Processor: Quad-core 1.60 Ghz Processor
• Memory: 1gb Ram, 8gb Flash
• Display: 8.0" Touchscreen
• Camera: 5.0mp Rear-facing W/ Flashlight
• Ports: Usb Type-c
• Dc Charging
• Db15 Com
• Battery: 4000mah, 7.4v Lithium-polymer Battery
• Dimensions: 9.45"Wx6.97"Hx1.18"D

Frequently Asked Questions:

Is The Autopropad An Equivalent As Other Xtool Products? This Is Different Than Other Xtool Machines You'll See On Sale In Other Countries.
The Xtool Autopropad Is That The Only Car Remote Key Programming Machine Made For Locksmiths Within The Us Market And Includes Extra Obd2 And Eeprom Software Specific To Us Vehicles.
The Cheaper Devices Like The Ps80, Ps90, X100pad, Or X100 Have A Number Of An Equivalent Hardware But Mainly Perform Only The Advanced Vehicle Diagnostic Functions That An Auto Shop Might Use. As An Example.
If You Buy A Ps80 (Instead Of An Autopropad), You'll Not Be Ready To Program Nissans With 20-digit Bcm, Ford Fusion Without Nastf, Toyota G, Toyota H, Toyota Smart Keys, Chrysler 200 Systems, Most Chrysler Pin Code Reads, Vw/audi Programming, Honda Prox, And Lots Of Others.

Includes:

• Autopropad Main Unit
• All Cables And Adapters Necessary For Programming And Auto Diagnostics, Including Obd1 For Older Nissan/infiniti
• Eeprom Adapters
• Kc100 Key Tag Tool (For Precoding Chips, And Later For Cloning)
• Breakout Box
• Charging Dock
• Usb C-type Data Cable
• Usb 3.0 Data Cable
• Ac Power Line
• Hard Shell Carrying Case
• User Manual
• Certificate Of Quality With Product Activation Info
• Packing List