Zed-Full ZFH-C02P VAG UDS Dashboard Cluster Connection Cable

Zed-Full ZFH-C02P VAG UDS Dashboard Cluster Connection Cable

Product Description:

Cables From IEA ( Zed Full ) with Product Number: MK5847
This Weight Product: 125g

Specs:

Manufacturer: IEA ( Zed Full )
Condition: New

The purpose of the Zed Full C02P cable is to produce a working key when all keys are lost on specific Volkswagen, Audi, Seat, and Skoda vehicles with the UDS NEC instrument cluster.
Zed Full VW UDS Nec all keys lost programming is done by removing the instrument cluster, connecting Zed Full VAG Instrument Cluster Reset Cable C02P to a specific point on the circuit board of the rear of the cluster (zed full screen will show you pin photo), and using the Zed Full programmer to place the instrument cluster into Service Mode.

Zed Full UDS Dashboard cable doesn't require Eeprom Removal or soldering, and Zed full will add a new key by inserting a Blank 48 transponder chip into Zed Full programmer Antenna.

The Zed Full UDS NEC cable is not required if you have a valid programmed key for the Vehicle. When all keys are lost, and you did not use the Zed Full VAG UDS cable, the airbag of the car may get damaged.

Zed Full NEC UDS VDO instrument cluster cable Supported Vehicles:

• Zed Full VOLKSWAGEN NEC UDS key programming
• Zed Full SKODA NEC UDS key programming
• Zed Full SEAT NEC UDS key programming
• Zed Full AUDI NEC UDS key programming

Supported Models: