Bestool BST-1515A Desoldering Wire Solder Remover Wire

Bestool BST-1515A Desoldering Wire Solder Remover Wire

Product Description:

Accessories From Bestool with Product Number: MK7719

Specs:

Manufacturer: BEST
Condition: New

• Place the desoldering wick over the solder to be removed, then push the heated soldering iron tip onto the desoldering wick. The solder will be absorbed.
• Remove the desoldering wick after the solder has been absorbed.
• Cut off the used section of the wick using nippers.
• Repeat steps 1 2 and 3 if the solder is not removed completely. Absorbability may differ depending on the type of solder. Sn63 Percent and 60 Percent (tin content) have good absorbability.

Features:

• High quality alloy copper wire from the precision weaving.
• For the removal of tin in the excess solder, resistance to oxidation and corrosion.
• Thermal conductivity, tin effect is very good, tin suction clean, Low residue.
• Suitable for precision circuit using.