FIAT Bypass - Emergency Start Device

FIAT Bypass - Emergency Start Device Overview

The tool bypasses the original immobiliser signal and allows you to start the car right after plugging it in. 

FIAT Bypass - Emergency Start Device Usage

Requirements:

• Car has to be equipped with mechanical key.
• Car has to be equipped with original parts. The device will work only in case of a lost key.
• If the car is equipped with an SGW Module (some models starting from 2017 year), you need to use SGW Adapter in order to bypass Security Gateway Module

How to use FIAT Bypass - Emergency Start Device :

• Insert the device into OBD plug
  (In some models produced from 2017 year, you have to use SGW Adapter)
  - the LED will start blinking fast.

• Turn the ignition ON - the LED will start blinking slowly.

• Start the car.

• If the LED keeps blinking fast after turning the ignition ON,
  take the key out, wait 30 seconds and turn the ignition ON again.
  Sometimes the procedure needs to be repeated again.

FIAT Bypass - Emergency Start Device Supported cars (Europe)