GATmatic GA-300M Garage Four-Wheel Alignment Equipment
Product Code: | MK24714 |
Categories | Automotive Workshop Equipment |
Manufacturer | GATmatic |
Product Code: | MK24714 |
Categories | Automotive Workshop Equipment |
Manufacturer | GATmatic |
Manufacturer | GATmatic |
Condition | New |
Weight | 300000 g |
Automotive Workshop Equipment From GATmatic with Product Number: MK24714
1. Performing on small scissor lifts
2. Two kinds of wheel clamps option
3. Automatically calculate wheel diameter
4. Support clamping the wheel from any directions
5. Real-time data reading makes adjustment easier
6. Supporting measurement in more complex situations
7. Dynamic coordinate, not affected by the inclination of car lifts
8. No need to wait during rolling or caster swing, save testing time
9. High-precision anti-throwing target, reinforced plastic enclosure
5.0 Mega Camera
Applying 5.0-megapixel high-definition cameras, five times higher than the industry average
(1.3 megapixels). Higher-pixel cameras capture more clear images, more accurate data, and
support smaller targets.
Even if 50% of the LED lights were not working, the camera can be used normally. It does not
affect the use of the wheel alignment camera.
There are two kinds of clamps in total, one is a four-jaw clamp and the other is a three-jaw clamp.
High-quality clamps support more measurement in more complex situations, such as the
deformation of steel rings, wheel clamps, target axis, and insufficient tire pressure.
Our clamps can support clamping the tire from any direction.
Different kinds of car lifts such as 4-post lifts, and scissor lifts are suitable for GA-300M
3D Wheel Aligner.
Self-developed 3D software to achieve OEM requirements. Moreover, the software is easy to
operate, reading basic four-wheel alignment data within a few minutes. It automatically
calculates wheel diameter, with no need to input manually with a unique quick testing mode,
saving time and working efficiently.
ITEM | PRECISION | RANGE |
Toe-in | ±2’ | ±20° |
Camber | ±2’ | ±20° |
Caster | ±4’ | ±20° |
SAI/KPI | ±6’ | ±20° |
Setback | ±2’ | ±5° |
Thrust Angle | ±2’ | ±5° |
Tread Difference | ±2mm | |
Wheelbase Difference | ±2mm |
Turntable | Wheel Clamp | Wheel Chock | Water-proof Target |
2 | 4 | 2 | 4 |
Wheel Clamp Adaptor | Brake Pedal Depressor | Steering Wheel Holder | Transition Bridge Block |
4 | 1 | 1 | 2 |