Skip to main content
Hi Guest Branches Contact us +971 588 22 22 11
GODIAG GT105 II ECU IMMO Prog AD OBD2 Break Out Box ECU Connector Display Vehicle Voltage Car Battery Voltage Lower Than 11V Alarm Prompt MK13326
GODIAG GT105 II ECU IMMO Prog AD OBD2 Break Out Box ECU Connector
GODIAG GT105 II ECU IMMO Prog AD OBD2 Break Out Box ECU Connector
GODIAG GT105 II ECU IMMO Prog AD OBD2 Break Out Box ECU Connector | MK3 -| thumbnail
New GODIAG GT105 II ECU IMMO Prog AD OBD2 Break Out Box ECU Connector Display Vehicle Voltage Car Battery Voltage Lower Than 11V Alarm Prompt | Emirates Keys -| thumbnail
New GODIAG GT105 II ECU IMMO Prog AD OBD2 Break Out Box ECU Connector Display Vehicle Voltage Car Battery Voltage Lower Than 11V Alarm Prompt | Emirates Keys -| thumbnail

GODIAG GT105 II ECU IMMO Prog AD OBD2 Break Out Box ECU Connector

Display Vehicle Voltage Car Battery Voltage Lower Than 11V Alarm Prompt

Write Review
$35.00 (€33.60)
Add to Wishlist
Product Code: MK13326
Categories Additional Adapter
Manufacturer GODIAG
In StockIn Stock
Product Specifications
Manufacturer GODIAG
Condition New
Weight 300 g

GODIAG GT105 II ECU IMMO Prog AD OBD2 Break Out Box ECU Connector

GODIAG GT105 II Description:

GODIAG ECU IMMO Prog AD GT105 II is used for short-circuiting OBD2 in the car for IMMO activation matching, ECU diagnosis and programming connection, and drawing power from the vehicle's battery for outdoor on-site vehicle maintenance. Compared with GT105, it it has added 5 new functions: vehicle voltage display, car remote control battery CR2032 battery test, car battery voltage alarm prompt(lower than 11V), TOYOTA steering angle matching, Lamborghini ID48 key IMMO auxiliary activation.

Additional Adapter From GODIAG with Product Number: MK13326
This Weight Product: 300g

GODIAG GT105 II Specs:

Manufacturer: GODIAG
Condition: New

GODIAG GT105 II Highlights:

 
1. A full-protocol ECU connection line for ECU programming power adjustment
2. OBD2 independent PIN 4 body GND, PIN5 signal GND for special programming of some modules.
3. PIN4 and PIN5 can be switched between short-circuit and non-short-circuit. 
4. Standard OBD2 independent PIN4, PIN5.
5. Pure copper female seat supports repeated insertion and removal, and has a long service life.
6. Battery clip treated with environmentally-friendly salt spray, with a thickness of 0.5mm.
7. The DC car battery cable adopts 0.75mm² 2-core sheathed cable, which supports DC5.5*2.5/ DC5.5*2.1 interface.
8. The DC connector has a resettable 7A fuse.
10. DC power interface, dedicated laboratory power connector.
 

GODIAG GT105 II Product Functions

1 Display current vehicle voltage
2 Alarm when voltage is lower than 10v to remind customers not to start the vehicle and program
3 Toyota steering angle synchronization matching
4 Lamborghini anti-theft activation
5. Remote control battery voltage test
 
IMMO AD power adapter function. After 2016,  for Ford all smart keys lost, GT105 II cooperates with VVDI equipment (OBDSTAR, AUTEL,) and other anti-theft matching equipment to program the keys.

All car keys lost matching---wake up the meter or wake up the anti-theft ECU. (Support VAG 4th and 5th generation anti-theft, Toyota ECU synchronization, auxiliary Mitsubishi all key lost matching or all lost remote control key setting, old Porsche Cayenne car for IMMO key learning.)

VPW, CANH, CANL, K-Line indicator lights can judge the communication status between the vehicle and the diagnostic programming device.  (If the product is used to connect the device, the user can simply judge whether the diagnostic programming is normal or not according to whether the device can send communication.)

On-site Maintenance
The GT105 II power adapter cable obtains 12V power from the car battery. (For programming equipment such as Xhorse Key Tool Plus Pad, VVDI Prog, CGDI Prog, IM608, etc., it provides 12V power supply when they need power outdoors, so as to read the data of BMW BENZ IMMO ECU, or other car ECUs, and finally realize the on-site maintenance of outdoor faulty vehicles. )
 
Provide 12V power supply for the key cutter (12V).
Standard OBD2 full protocol ECU programming line. (With MPPS, FGTech, Kess v2, etc., for ECU data reading and writing, ECU cloning, ECU tuning, etc.) (Note: OBD2 full protocol ECU programming line is purchased separately)
 
OBD Battery Replacement Tool
Realize the uninterruptible power supply during the battery replacement, so it can prevent data loss, key failure or re-matching caused by power interruption during the battery replacement.
GODIAG GT105 II ECU IMMO Prog AD OBD2 Break Out Box ECU Connector 
GODIAG GT105 II ECU IMMO Prog AD OBD2 Break Out Box ECU Connector 
 
With GT105 II, you can enjoy the functions listed below during the battery replacement:
 
1. The clock does not change.
2. The speaker is not locked.
3. IMMO is not locked.
4. Glass door is not set.
5. The throttle is not set.
6. The warning light is off.
7. No fault code.
 

GODIAG GT105 II vs. GT105
 

Model GODIAG GT105 II GODIAG GT105
Vehicle voltage display √ X
Car remote control battery CR2032 battery test √ X
Car battery voltage alarm prompt(lower than 11V) √ X
TOYOTA steering angle matching √ X
Lamborghini ID48 key IMMO auxiliary activation √ X
DC reverse connection protection, internal short circuit self-recovery protection √ √
OBD2 interface 4PIN and 5PIN short circuit function √ √
VW AUDI VAG immo4 forced activation √ √
TOYOTA ECU IMMO auxiliary activation matching √ √
Mitsubishi IMMO auxiliary activation matching √ √
Porsche IMMO auxiliary activation matching √ √
VPW communication protocol indication √ √
CANH communication protocol indication √ √
CANL communication protocol indication √ √
K-line communication protocol indication √ √
Battery power supply, uninterruptible power supply DIY clip cable Accessory Special 2.5m clip cable for obtaining power


GODIAG GT105 II ECU IMMO Prog AD OBD2 Break Out Box ECU Connector 

 

To top